Genisys 18 titanium replacement blade is compatible with Segway Navimow Ti3 0.75 mm spare blades - LongLife - 1-hole unbreakable [DIN EN 50636 verified]
* Incl. VAT excl. Shipping
18 stainless knife of GENISYS®
with titanium carbidecoating (thickness 0.75 mm) type Ti3
caution: there are many "Golden" titanium knives offered.
Titanium is very soft and can't be cured.
Only titanium carbide (titanium+Carbon) can be cured.
Only we have the titanium carbide coating-consuming, case-hardened,
so that the service life of at least 50% extended!
Titanium carbide is a compound (made of titanium and carbon), which is very hard, up to 5x as hard as the knife now.
As a result, we have solved a Problem. Take a tough steel that is properly sharpened,and
break the knife slightly, and there is danger of injury due to lying around knives parts and the blades are broken.
The titanium carbide coating, the knife can be sanded really sharp and the knives stay sharp for a long time.
Trust is good, control is better. Therefore,
the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
Genisys quality guarantee: this is the Only brand according to the DIN EN 50636/ VDE 0700-107 tested.
These knives are 100% compatible to the original diameter
Due to the higher weight of the knife falls to the cut clean and smooth out.
Try this Premium knife, you will be amazed.
The appropriate number of screws is.
Please note that the screws should always be replaced.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model). When should you, the knife switch? If the Halmspitzen not clean and smooth cut, but only be "plucked" to be.
You can see this in white/grey increasingly shoddy Halmspitzen.
18 stainless knife of GENISYS®
with titanium carbidecoating (thickness 0.75 mm) type Ti3
caution: there are many "Golden" titanium knives offered.
Titanium is very soft and can't be cured.
Only titanium carbide (titanium+Carbon) can be cured.
Only we have the titanium carbide coating-consuming, case-hardened,
so that the service life of at least 50% extended!
Titanium carbide is a compound (made of titanium and carbon), which is very hard, up to 5x as hard as the knife now.
As a result, we have solved a Problem. Take a tough steel that is properly sharpened,and
break the knife slightly, and there is danger of injury due to lying around knives parts and the blades are broken.
The titanium carbide coating, the knife can be sanded really sharp and the knives stay sharp for a long time.
Trust is good, control is better. Therefore,
the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
Genisys quality guarantee: this is the Only brand according to the DIN EN 50636/ VDE 0700-107 tested.
These knives are 100% compatible to the original diameter
Due to the higher weight of the knife falls to the cut clean and smooth out.
Try this Premium knife, you will be amazed.
The appropriate number of screws is.
Please note that the screws should always be replaced.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model). When should you, the knife switch? If the Halmspitzen not clean and smooth cut, but only be "plucked" to be.
You can see this in white/grey increasingly shoddy Halmspitzen.
| Item ID | 72532 |
| Condition | New |
| Age rating | No age restriction |
| Model | MSeg-MHu-Ti-durchgGew-18 |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 18 piece |
| Weight | 100 g |
| Net weight | 95 g |
| Dimensions | 140×90×10 mm |
