6 cable connectors + 2 connection terminals compatible with Gardena R38Li R40Li R45Li - Original 3M
* Incl. VAT excl. Shipping
6x cable connector, wire connector (blue) and 2x clip-on terminals (red) - Original™ 314 and 951 of 3M®
- repair connection of a severed wire / Installation of the search cable / connector of the cable to the charging station
- , No Stripping of the cable is necessary due to the proven U-contact principle
- with gel filling (314): waterproof, moisture-resistant, weather-resistant
- Compatible with the Gardena robotic lawn mower models: R38Li, R40Li, R45Li, ...
The two cable ends of the severed cable until the very end of the connector to be pushed.
The 3. Hole can be free to be left, or is a search cable available (depending on the model of the robotic mower manufacturer to check).
Depending on the damage , if necessary. in addition, a piece of cable to be used, or the cable routing is slightly changed.
Then the blue part is fully pressed to be (easiest with a pair of pliers) to have a permanent connection to ensure.
The connection to the charging station, the end of the cable into the U-contact with the terminal and press together. (depending on the model of the robotic mower manufacturer)check
the manufacturer's data:
- temperature, operating, max.:140°C
- temperature, operating, min.:-40°C
- To Max. Diameter of wire: 3.94 mm
- rated current from 15A
- up to 600 V
6x cable connector, wire connector (blue) and 2x clip-on terminals (red) - Original™ 314 and 951 of 3M®
- repair connection of a severed wire / Installation of the search cable / connector of the cable to the charging station
- , No Stripping of the cable is necessary due to the proven U-contact principle
- with gel filling (314): waterproof, moisture-resistant, weather-resistant
- Compatible with the Gardena robotic lawn mower models: R38Li, R40Li, R45Li, ...
The two cable ends of the severed cable until the very end of the connector to be pushed.
The 3. Hole can be free to be left, or is a search cable available (depending on the model of the robotic mower manufacturer to check).
Depending on the damage , if necessary. in addition, a piece of cable to be used, or the cable routing is slightly changed.
Then the blue part is fully pressed to be (easiest with a pair of pliers) to have a permanent connection to ensure.
The connection to the charging station, the end of the cable into the U-contact with the terminal and press together. (depending on the model of the robotic mower manufacturer)check
the manufacturer's data:
- temperature, operating, max.:140°C
- temperature, operating, min.:-40°C
- To Max. Diameter of wire: 3.94 mm
- rated current from 15A
- up to 600 V
| Item ID | 31955 |
| Condition | New |
| Age rating | No age restriction |
| Model | V3M-Ga-314x6+951x2 |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 10 piece |
| Weight | 51 g |
| Net weight | 60 g |
| Dimensions | 0×0×0 mm |
