Genisys 30 titanium replacement knives quality Blades 0.75 mm compatible with Yard force SA SC LUV X NX Amiro MowBest EasyMow Compact LongLife - unbreakable [DIN EN 50636 verified]
* Incl. VAT excl. Shipping
30 extra-hardened titanium knife Genisys incl. Screws
Best durability: with titanium carbidecoating (thickness 0.75 mm) type Ti-3, sharpened on both sides
the Highest level of safety: Our knives are the only robotic mower blades according to the safety Directive DIN EN 50636 with the OTH tested!
Quality promise: the quality of our knives was, together with the East Bavarian Technical University examined.
Compatible with Yard Force (all) mower models: SC-, SA-, X -, and NX - series, LUV, Amiro, MowBest, EasyMow, Compact
caution: there are many "Golden" titanium knives offered.
Titanium is very soft and can't be cured.
Only titanium carbide (titanium+Carbon) can be cured.
Only we have the titanium carbide coating-consuming, case-hardened,
so that the service life of at least 50% extended!
Titanium carbide is a compound (made of titanium and carbon), which is up to 5x as hard as comparable steel blades.
As a result, we have solved a Problem. Take a tough steel that is properly sharpened,and
break the knife easily. Injury hazard due to lying around knives parts and the blades are broken.
The titanium carbide coating, the knife can be sanded really sharp and the knives stay sharp for a long time.
The durability, in addition to 50% extended
trust is good, control is better. Therefore,
the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
These knives are 100% compatible to the original diameter, and fit for all models
Due to the higher weight of the knife falls to the cut clean and smooth out.
The appropriate number of screws is.
Please note that the screws should always be replaced.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model).
When should you, the knife switch?
If the Halmspitzen are not cut clean and smooth, but only "plucked".
You can see this in a white/grey in the increasingly shoddy Halmspitzen.
We offer even more high quality knife to 0.75 mm thickness and extra-hardened titanium knife.
30 extra-hardened titanium knife Genisys incl. Screws
Best durability: with titanium carbidecoating (thickness 0.75 mm) type Ti-3, sharpened on both sides
the Highest level of safety: Our knives are the only robotic mower blades according to the safety Directive DIN EN 50636 with the OTH tested!
Quality promise: the quality of our knives was, together with the East Bavarian Technical University examined.
Compatible with Yard Force (all) mower models: SC-, SA-, X -, and NX - series, LUV, Amiro, MowBest, EasyMow, Compact
caution: there are many "Golden" titanium knives offered.
Titanium is very soft and can't be cured.
Only titanium carbide (titanium+Carbon) can be cured.
Only we have the titanium carbide coating-consuming, case-hardened,
so that the service life of at least 50% extended!
Titanium carbide is a compound (made of titanium and carbon), which is up to 5x as hard as comparable steel blades.
As a result, we have solved a Problem. Take a tough steel that is properly sharpened,and
break the knife easily. Injury hazard due to lying around knives parts and the blades are broken.
The titanium carbide coating, the knife can be sanded really sharp and the knives stay sharp for a long time.
The durability, in addition to 50% extended
trust is good, control is better. Therefore,
the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
These knives are 100% compatible to the original diameter, and fit for all models
Due to the higher weight of the knife falls to the cut clean and smooth out.
The appropriate number of screws is.
Please note that the screws should always be replaced.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model).
When should you, the knife switch?
If the Halmspitzen are not cut clean and smooth, but only "plucked".
You can see this in a white/grey in the increasingly shoddy Halmspitzen.
We offer even more high quality knife to 0.75 mm thickness and extra-hardened titanium knife.
| Item ID | 10786 |
| Condition | New |
| Age rating | No age restriction |
| Variation ID | MYaG-Ti075x30 |
| Model | MYaG-Ti075x30 |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 30 piece |
| Weight | 150 g |
| Net weight | 150 g |
| Dimensions | ×× mm |
