30 TITAN replacement blades 0.75mm compatible with McCulloch Rob R600 R1000 Mc Culloch
* Incl. VAT excl. Shipping
30 extra-hardened titanium knife of GENISYS®
with titanium carbidecoating (thickness 0.75 mm) type Ti-3
incl. 30 screws
for all Compatible with McCulloch® -robotic mower models
caution: there are many "Golden" titanium knives offered.
Titanium is very soft and can't be cured.
Only titanium carbide (titanium+Carbon) can be cured.
Only we have the titanium carbide coating-consuming, case-hardened,
so that the service life of at least 50% extended!
Titanium carbide is a compound (made of titanium and carbon), which is up to 5x as hard as comparable steel blades.
As a result, we have solved a Problem. Take a tough steel that is properly sharpened,and
break the knife easily. Injury hazard due to lying around knives parts and the blades are broken.
The titanium carbide coating, the knife can be sanded really sharp and the knives stay sharp for a long time.
The durability, in addition to 50% extended
trust is good, control is better. Therefore,
the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
These knives are 100% compatible to the original Compatible with McCulloch® knives
Due to the higher weight of the knife falls to the cut clean and smooth out.
Try this Premium knife, you will be amazed.
The knife fit for all Compatible with McCulloch® robotic mower models
have The appropriate number of screws is.
Please note that the screws should always be replaced.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model).
When should you, the knife switch?
If the Halmspitzen are not cut clean and smooth, but only "plucked".
You can see this in a white/grey in the increasingly shoddy Halmspitzen.
We offer even more high quality knife to 0.75 mm thickness and extra-hardened titanium knife.
You are bidding on:
- 30 rust-free knives with titanium carbide coating of Genisys®
- 30 screw from a German manufacturer,
- Suitable for all Compatible with McCulloch models: Rob R600, Rob R1000, ...
30 extra-hardened titanium knife of GENISYS®
with titanium carbidecoating (thickness 0.75 mm) type Ti-3
incl. 30 screws
for all Compatible with McCulloch® -robotic mower models
caution: there are many "Golden" titanium knives offered.
Titanium is very soft and can't be cured.
Only titanium carbide (titanium+Carbon) can be cured.
Only we have the titanium carbide coating-consuming, case-hardened,
so that the service life of at least 50% extended!
Titanium carbide is a compound (made of titanium and carbon), which is up to 5x as hard as comparable steel blades.
As a result, we have solved a Problem. Take a tough steel that is properly sharpened,and
break the knife easily. Injury hazard due to lying around knives parts and the blades are broken.
The titanium carbide coating, the knife can be sanded really sharp and the knives stay sharp for a long time.
The durability, in addition to 50% extended
trust is good, control is better. Therefore,
the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
These knives are 100% compatible to the original Compatible with McCulloch® knives
Due to the higher weight of the knife falls to the cut clean and smooth out.
Try this Premium knife, you will be amazed.
The knife fit for all Compatible with McCulloch® robotic mower models
have The appropriate number of screws is.
Please note that the screws should always be replaced.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model).
When should you, the knife switch?
If the Halmspitzen are not cut clean and smooth, but only "plucked".
You can see this in a white/grey in the increasingly shoddy Halmspitzen.
We offer even more high quality knife to 0.75 mm thickness and extra-hardened titanium knife.
You are bidding on:
- 30 rust-free knives with titanium carbide coating of Genisys®
- 30 screw from a German manufacturer,
- Suitable for all Compatible with McCulloch models: Rob R600, Rob R1000, ...
| Item ID | 11007 |
| Condition | New |
| Age rating | No age restriction |
| Variation ID | MMcCG-Ti075x30 |
| Model | MMcCG-Ti075x30 |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 30 piece |
| Weight | 149 g |
| Net weight | 140 g |
| Dimensions | ×× mm |
