Genisys 18 titanium replacement Blades compatible with Honda Miimo (LongLife - 0.5 mm) NEW + 18 screws [DIN EN 50636 verified]
* Incl. VAT excl. Shipping
18 extra-hardened titanium knife of GENISYS® incl. 18 screw on both Sides sharpened! Unbreakable!
with titanium carbidecoating type: Ti-3 (thickness 0.5 mm extra thick for a longer shelf-life)
, the Highest security: Our knives are the only robotic mower blades according to the safety Directive DIN EN 50636 with the OTH tested!
Quality promise: the quality of our knives was, together with the East Bavarian Technical University examined.
Compatible with Honda Miimo models: Miimo 310, Miimo 520, Miimo 3000, Miimo HRM 310, Miimo HRM 520, Miimo HRM-3000
trust is good, control is better: Why is the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
These knives are 100% compatible to the original knife and fit for all models from
the hardened titanium-carbide coating is the shelf life significantly improved without the rigidity and thus a possible Break to increase!
The appropriate number of screws is.
Please note that the screws also changed always should be.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model).
When should you, the knife switch?
If the Halmspitzen are not cut clean and smooth, but only "plucked".
You can see this in a white/grey in the increasingly shoddy Halmspitzen.
18 extra-hardened titanium knife of GENISYS® incl. 18 screw on both Sides sharpened! Unbreakable!
with titanium carbidecoating type: Ti-3 (thickness 0.5 mm extra thick for a longer shelf-life)
, the Highest security: Our knives are the only robotic mower blades according to the safety Directive DIN EN 50636 with the OTH tested!
Quality promise: the quality of our knives was, together with the East Bavarian Technical University examined.
Compatible with Honda Miimo models: Miimo 310, Miimo 520, Miimo 3000, Miimo HRM 310, Miimo HRM 520, Miimo HRM-3000
trust is good, control is better: Why is the quality of our knife of the East Bavarian Technical University (OTH Amberg-Weiden) is continuously checked.
These knives are 100% compatible to the original knife and fit for all models from
the hardened titanium-carbide coating is the shelf life significantly improved without the rigidity and thus a possible Break to increase!
The appropriate number of screws is.
Please note that the screws also changed always should be.
It is also recommended to replace the entire set of blades (3 or 5, depending on the model).
When should you, the knife switch?
If the Halmspitzen are not cut clean and smooth, but only "plucked".
You can see this in a white/grey in the increasingly shoddy Halmspitzen.
| Item ID | 72040 |
| Condition | New |
| Age rating | No age restriction |
| Model | MHonG-Tix18 |
| Manufacturer | Genisys |
| Manufacturing country | Germany |
| Content | 18 piece |
| Weight | 110 g |
| Net weight | 110 g |
| Dimensions | 0×0×0 mm |
